News

RJG UK: eDART® V10 Training Course Now Available Online

Are you struggling with a part that you just can’t get quite right? Perhaps one cavity is intermittently shorting, blocking itself off, or the mould tool has cavity balance issues causing dimensional faults?

If you’re in injection moulding, then there’s likely to be at least...

8 Good Injection Moulding Principles You Should Follow

By John Lobozzo, Technical Sales Engineer, RJG Technologies

Whether you've been directly involved in the injection moulding industry or not, plastic parts have accompanied you your whole life if we count the rattle and dummy that gets thrust upon us moments after entering the...

What Is the Difference Between Weld, Knit, and Meld Lines and Why Does It Matter?

By Jeremy Williams, Consultant/Trainer

In the plastic injection molding industry, we work with materials that are byproducts of oil refinement and molds made of metal casting, so our terminology is bound to be at least slightly confusing. Three terms that often get mixed up...

Clamp Force: Why It’s Vital to Your Injection Moulding Process and How to Calculate It

By Jim Clifford, Consultant / Trainer, RJG

Clamp force is one of the most overlooked portions of the Injection Moulding process. I can’t count how many times I’ve walked up to a moulding machine to see that the clamp force was set at max. This can cause machine or mould...

RJG Goes Virtual, Offers Online Training and Services

Now more than ever it is vital to stay competitive in the injection moulding industry and to offer the highest quality products at the fastest speed to market and lowest cost. RJG has adjusted to the new norm of the post-COVID world and developed several virtual training and...

Make Better Parts for Less Cost with RJG’s CoPilot® Process Control

The CoPilot is an injection moulding process monitoring and control software that allows users to view and record data from the machine and mould. They can see what’s happening from the plastic’s point of view through the use of sensors placed in the mould. Each CoPilot...

COVID-19 Update

To our valued clients:

We want to personally thank you for being an RJG client and take this opportunity to share an update on actions we are taking to help protect against the spread of COVID-19 while still making every attempt to support you and your business. Given the...

5 Questions to Ask Before Instrumenting a Mould

Putting a sensor anywhere in a tool can give you some form of data, but it may not be value-added. The key is knowing upfront what you want the sensor to do for you before determining where to place it and what type of sensor you want to use. Start by answering these 5...

Why Cushion Is Critical for Your Injection Moulding Process

By Jim Clifford, Consultant / Trainer at RJG

Some may ask: Why bother with cushion if you monitor Peak Shot Volume? Though it is important to monitor Peak Shot Volume to ensure you are injecting the same amount of material into the mould every time, cushion can be just as...

RJG UK Nominated Plastic Industry Award Finalist!

RJG Technologies have been shortlisted as one of four finalists in the Best Technology Application Category of the 2019 Plastic Industry Awards. The other finalists are Connect 2 Cleanrooms, Kongsberg Automotive, and Rosti Automotive Larkhall. The background to our entry was:

...