Create a better process by identifying molding problems.
Advanced eDART® training is intended for anyone who needs know how to effectively run an eDART® System process controller or needs to know how to use the eDART® System to identify molding problems, such as short shots or other process inconsistencies.
Attendees will increase their DECOUPLED MOLDING® processing skills by learning about cavity pressure sensors, including how to connect and verify that they are properly installed, start and stop jobs, verify alarms and templates, set-up the eDART® to do abnormal part containment, and properly set up alarms to catch and contain all suspect parts. The course will include an introduction to Decoupled III Machine Control, but it does not cover building a process.
Upon completion of the class, attendees will be able to:
Course Length: 3 days
This course is held exclusively as a public course at RJG Training Centers.
|Start Date||End Date||Name||Language||Town/City||State||Online||Open Seats||Cost|
|02/07/2019||04/07/2019||Advanced eDART® Training||English||Peterborough||NA||No||12||£935||Register|
|24/09/2019||26/09/2019||Advanced eDART® Training||English||Peterborough||NA||No||12||£935||Register|
Current Waiting List Size:
If a seat becomes available and we contact you to fill that seat, you will have 24 hours to accept the seat before we offer it to the next person on the list.
Please fill out the form below if you wish to be on the waiting list for this class.